This Is Why Your KitchenAid Mixers Need Maintenance: How & Why

Mixers Needing Maintenance

KitchenAid stand mixers are a major star in the kitchen. These are not only a fun splash of color but also real powerhouses for bakers. These mixers have mechanical parts that will wear out over time, despite being fantastic tools.

Do KitchenAid mixers need maintenance? KitchenAid mixers need maintenance like any other appliance and machine you have. Ensuring proper care and maintenance will keep your mixer in top shape and utmost working order. 

KitchenAid mixers are way too expensive to be thrown away after a few uses. Learn how to clean your KitchenAid Stand Mixer and how to repair any minor issues you might have.

Handling Your Brand-New KitchenAid Stand Mixer

Your brand-new KitchenAid stand mixer has finally arrived! After removing all the tape and opening the box flaps, take a moment to visualize the creations you will be making with it.

When you begin to remove this magical piece of equipment, keep an eye on the package. Various secret compartments house all of the mystifying wonders needed to set up your appliance.

Take out the book, keep it in your hands, and treasure it. Never let the water reach it because you will surely use this for a long time.

Now is the time to shift the box to a more open location or a flat surface.

  1. Sit on the floor and grab the box with both hands and feet.
  2. Take the stand mixer out of the box.
  3. Place it on the counter, remove the remainder of the packaging, and marvel at the elegance of this kitchen appliance.
  4. Begin cleaning it before using it.

Read the Manual

Reading the manual will help you keep your mixer in good working order. You will understand how to use the system properly if you read the manual.

You can learn about the most important ways to keep a stand mixer secure and well-maintained.

Care and Maintenance for Your KitchenAid Stand Mixer

1. Cleaning Your KitchenAid Stand Mixer

Hot, soapy water is the perfect way to clean your stand mixer. Remove all of the attachments first. Always make sure to clean all of them.

This one portion gets clogged with food when you turn your mixer on high. The batter may also splatter all over it.

Here is what you should do if you are having trouble adding or removing the accessories:

  • Apply a small amount of oil to the pins and spring.
  • Shift it up and down a few times to lubricate it.

If your machine is brand new, it is best to wash it and the attachments with warm, soapy water before use. This method will remove any dust that has collected in the factory.

2. Invest in Extra Attachments and a Bowl

If you are a frequent baker, consider buying additional attachments and a bowl. This will allow you to move on to the next batch without having to clean anything first.

It could take up more space, but if you are doing a lot of baking, these extra tools will save you a lot of time.

3. Caring for KitchenAid Attachments

The majority of KitchenAid attachments are polished and can be cleaned in the dishwasher. They are usually white, as shown by the dough hook and flat beater.

If you have stainless steel accessories, however, you must hand wash them.

It gets yucky, and black stuff forms on it if you don’t wash it by hand. Aluminum does not wash well in a dishwasher because it oxidizes, leaving you with a dreadful black surface.

If this is not your case, there is a way to address the problem:

  • Put two cups of vinegar in a kettle and add enough water to cover the attachment’s neck when inserting it.
  • Boil for 20 minutes.
  • Wipe it with a clean rag to remove the black material. If any remains, repeat the procedure until it is clean.

Ensuring that you remove all of the attachments after each use is the best care you can give your stand mixer. Clean your mixer with warm, soapy water, and wash the attachments properly.

4. Know the Fundamental Elements

Oil isn’t always needed for mixers. However, you must decide whether or not your system has an oil leak. If there is a leak, try to fix it as soon as possible.

Oil leakage from the beater shaft and the bottom of the bowl will occur over a mixer’s life.

To stop this, make sure the mixer is switched on without any ingredients in it. This could be useful for avoiding oil leaks.

5. Warm-Up

It is best to warm up your mixer before using it. This will give the computer a good start and allow it to work correctly.

6. Keep an Eye Out for Overheating

You must keep an eye on the mixer to make sure it doesn’t overheat. You must be vigilant when selecting the recipe for which you will use the mixer.

Because of excessive overheating of the product, the auto shut-off feature can become infected. As a consequence, it’s best to stick to recipes that fit your mixer. Keep a close eye on this.

Minor KitchenAid Stand Mixer Problems

It takes some slight adjustments and tuning to keep a new appliance like the KitchenAid stand mixer running correctly.

Here are some things you might not know about your mixer that will help you keep it running smoothly.

1. Wiggling Stand Mixer

If you experience this, you will need to fix the wiggle on a tilt-head KitchenAid stand mixer. You might find that your stand mixer starts to wiggle after repeated use.

The hinge pin should be tightened as follows:

  • Turn the stand mixer upside down and lock down the head.
  • If you look far enough into the mixer’s foundation, you’ll find a tiny screw that pushes against the pin. Tighten this small screw as much as possible, and the problem should be solved or reduced.
  • You may also maximize the distance between the bowl and the attachment by changing the large screw that controls the head tilt.

Because the KitchenAid stand mixer is a powerful tool, it can get messy when used quickly. It gets messier if you don’t have a pouring or spillage shield.

Before you turn on your appliance, throw a dish towel over the bowl to keep the surrounding area clean.

2. Misaligned Mixer/Beater

Adjust the beater on your KitchenAid mixer. It’s predetermined when you get your new KitchenAid stand mixer and clears the bowl while in use.

However, you might find that you need to make some adjustments after using it for a while.

According to KitchenAid experts, you can place a dime in the bowl to test the beater-to-bowl clearance. Turn on the flat beater given; if it does not move the dime, you must lower the beater.

The clearance, on the other hand, is perfect if the dime bounces around a bit.

You can adjust the beaters with a single screw. Once you have the correct adjustment, it will not hit the bottom or side of the bowl. Perform the following actions:

  • Start by unplugging the stand mixer.
  • Place the bowl lift handle down in the bowl lift mixer and the motorhead back in the lift-top mixer.
  • Attach your beater and close the top section to see if you need to change it.
  • Find the screw on the stand mixer’s neck and move it so that the beater only clears the bowl’s surface.
  • To lower the mixing bowl, turn the screw clockwise, while to raise it, turn the screw counterclockwise. It takes just a small switch. The same goes for the bowl raise and tilt-head mixer.
  • The bowl-lift mixers screw. On the other hand, you will see where the stand mixer’s head meets the butt.
  • To verify clearance, shift the bowl lift handle to the up position or lower the motorhead.
  • Repeat these steps until you are satisfied.

3. Beater Vibrates and Hits Bottom of Bowl

Make sure the bowl clearance is adjusted correctly. Turn the flat head screw positioned under the mixer’s head portion to lift or lower the bowl.

Lower the bowl by turning the screw clockwise, and raise it by turning the screw counterclockwise.

Change the mixing bowl’s height so that the beater does not touch the bowl’s bottom or sides. Try centering the pivot pin if it isn’t focused and stable.

To secure the pivot pin, turn the mixer on its side and tighten the screw underneath it.

4. Does Not Turn On

Make sure the mixer is switched on. If the mixer is plugged into a GFCI socket, make sure it hasn’t been reset. Check the breaker for that outlet if the mixer is plugged in and the GFCI is not reset.

If you find that the mixer is getting control, the mixer’s cord may be the problem. It can be either broken or that an internal component is malfunctioning.

Here are the reasons why your mixer won’t turn on:

  • Broken speed control function.
  • Poor mixer control board.
  • Worn-out carbon motor brushes.
  • Damage in the mixer’s wiring.

5. Grinding Noise

A worn worm gear is the most common cause of your KitchenAid mixer working but making loud internal grinding noises.

You may also have a problem with the mixer’s transmission. You must immediately dismantle, remove, and replace all worn-out gear of your KitchenAid stand mixer.

Tips for Storing Your KitchenAid Stand Mixers

KitchenAid stand mixers are reasonably lightweight mixers that can fit comfortably into most homes. However, this can also depend on the size of your kitchen and equipment.

You might need to come up with more innovative storage solutions for your stand mixer. Some of our favorite kitchen storage ideas are mentioned below to help you get started.


Pegboard storage isn’t just for equipment in the garage. Installing a pegboard on your kitchen wall is a fast and easy way to increase storage space.

You can paint the board any color you want to match your kitchen decor. You can add hooks to the pegboard so that you can hang your various mixer attachments and other popular kitchen equipment.

You may also connect a shelf or two to your pegboard storage with the right hooks. Make sure these shelves aren’t too full.

Store Your Accessories in a Bowl

I bet you will be using your KitchenAid mixer all the time. And I know that you don’t want to waste time looking for your accessories. To avoid this, you can store them in the mixer’s bowl.

Set aside the attachments while using your stand mixer. Remember to return them to the bowl once it is clean. The bowl should be lined with a paper towel to prevent starches from accumulating.

Blind Corner Cabinet

The kitchen corner is frequently underutilized, but it would be great for storing your KitchenAid mixer. There are at least eight styles of blind corner cabinets. In one of these, you can conveniently store your mixer out of the way.

Pull-out solutions are highly recommended. They can make it much easier to access all of your kitchen equipment.

Maximizing Space While Safely Storing Your Stand Mixer

  1. Installing Appliance Lift Kit – Installing an appliance lift kit will give you more counter space as well as a useful room. This robust shelf can be swung up and out and then locked in place.

    It lifts the height of your easily stored mixer to counter level. You can easily tuck it back under the counter when you’re finished using the mixer, without having to lift or move something.

    You can also store your various stand mixer attachments in the space beneath the lift package.

  2. Adding Hooks – If you have enough shelf space but don’t want to jumble your mixer attachments with the rest of your kitchen utensils in a drawer, you can conveniently store them in the same cabinet as your mixer!

    You can use screw-in hooks or damage-free command strips to hold all of your mixer attachments within easy reach.


Regular maintenance is one way to prolong the life of your mixer. It is also essential to use it with caution to keep it in good working order.

Before using your KitchenAid mixer, try to understand its advantages and disadvantages. These will also help you in managing and recognizing specifications.

Recent Posts